home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Atari Compendium
/
The Atari Compendium (Toad Computers) (1994).iso
/
files
/
umich
/
utils
/
tdss_1_2.lzh
/
TIMEDATE.TXT
< prev
Wrap
Text File
|
1992-10-17
|
2KB
|
87 lines
Time & Date, Setter & Saver (T.D.S.S.)
Documentation for 'TIMEDATE.PRG'. The
automatic time & date setter, which
saves the date, and only changes the
settings when YOU want it done!
(in 40-columns for simplicity)
To start with, the best (and quickest)
place to put this program, is in the
AUTO folder - it doesn't matter if
it's first or last!! (Unless something
else you run also sets the time)
This way your time will be more or
less correctly set everytime you boot
your machine!
Simple really - the program will, if
loaded normally, display a greeting,
and show you the current time and date
in the system. Or, if the machine
has just been reset, it will read the
time and date in from the TIMEDATE.SET
file which is used to store the time &
date, so that it doesn't require
changing EVERY time you boot up.
(In my case, the system date always
used to be sometime in 1987).
If you wish to change the time & date,
then, simply hold down the Control
button while the program is loading.
(This is done so as not to interfere
with the many other programs that
use the Shift or Alternate keys such
as Super-boot) You are then asked to
enter the time. Enter this in 24-hour
format. (e.g. 7 O'clock (pm) becomes
19 O'Clock, but 7 O'clock (am) is
still 7 O'Clock!)
The date is in UK format, (Date, Month
then Year).
The Time & Date is saved in a standard
ASCII file 'TIMEDATE.SET' which if you
wish can be updated manually using a
text editor!!
Addendum for version 1.2
Version 1.0 had two STUPID bugs which I
can't believe I missed. Running the
program in Low-resolution (e.g. from
the AUTO folder) would cause a large
amount of the text to disappear off the
right side of the screen, this has now
been fixed!
The other was, running the program from
the AUTO folder, would not let you
re-configure by holding down the mouse
keys on older versions of TOS (<1.4)
So, it was changed to the probably more
convenient, and space-saving, 'CONTROL'.
I've also reduced the memory used while
the program is running by a couple of
hundred bytes, and sped it up slightly!
(Although, with such a small program
it can't be noticed, but knocking an
entire loop out of the program, does
speed things up!)
I can be contacted at:
Internet/Usenet/Telnet/Bitnet:
WELLS_S@Kosmos.wcc.govt.nz
FNET:
Steven Wells at Node #613
(Z*NET South Pacific)
(Copyright 1992, Mercenary Software)